4.Make sure that sufficient room is provided around the appliance to ensure free air circulation.
Fit the two plastic wall spacer supplied with the appliance rotating 1/4 turn to the condenser at the back of the refrigerator (see diagram).
5.The fridge/freezer should be located on a smooth surface. The two front feet can be adjusted as required. To ensure that, your appliance is standing upright adjust the two front feet by turning clockwise or
6.Refer to cleaning and care section to prepare your appliance for use.
WARNING!
Do not connect your appliance to the electricity supply until all the packing and transit protectors have been removed including polystyrene block(s) inserted between the compressor motor and
the cabinet (see diagrams).
Do not remove the plastic drain tray fitted above the compressor motor on models with
auto - defrost fridge.
7.To take out the baskets from the freezer compartment please proceed as in item:
5