Beko CS5533APW manual Replacing The Interior Light Bulb, Fitting Handle

Models: CS5533APW

1 26
Download 26 pages 55.49 Kb
Page 10
Image 10
REPLACING THE INTERIOR LIGHT BULB

REPLACING THE INTERIOR LIGHT BULB

Should the light fail to work, proceed as follows.

1.Switch off at the socket outlet and pull out the mains plug.

• You may find it useful to remove shelves for easy access.

2.Use a flat tipped screwdriver to remove the light diffuser cover by inserting the blade in each of the two recesses to prise off each side.

3.First check that the bulb hasn’t worked loose by ensuring it is screwed securely in the holder. Replace the plug and switch on. If the bulb works, replace the light cover by inserting the rear lug and pushing up to locate the front two lugs.

4.If the light still fails to work, switch off at the socket outlet and pull out the mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.

5.Carefully dispose of the burnt-out light bulb immediately. Replacement light bulb can easily be obtained from a good local electrical or DIY store.

FITTING HANDLE

Using the screws and plastic plugs supplied in the installation kit inside the fridge, fit handles to the desired side (see diagram Page 12 for locations)

9

EN

Page 10
Image 10
Beko CS5533APW manual Replacing The Interior Light Bulb, Fitting Handle