Cleaning and Care, Aluminum filter, 12 / 13 EN

5Cleaning and Care

Prior to maintenance, unplug the appliance or turn the main switch off or loosen the fuse that supplies the hood or turn it off.

Clean your stainless steel hood

with cleaning agents specifically produced for this material.

WARNING: Never use rubbing mate- A rials (wire wool) or abrasive materi- als (brushes, the harder side of the

scouring sponge etc.).

WARNING: Sterilizers, products made of carbon steel or similar mate-

A rial containing chloride may cause black stains, corrosion or permanent marks when they contact with stain- less steel.

This filter is intended to retain the oil particles in the air. You are recommended to clean your filter every month under normal usage conditions.

1.Push the aluminum filter lock forward. Note

•• You can wash your aluminum filters in dish- washer also.

•• A discoloration may be observed on aluminum filters as they are washed. This is normal, you do not need to replace your filter.

2.Then, slightly lower it and pull forward. Otherwise, you may bend the filter.

3.Wash the filters with liquid detergent and then rinse them with water.

4.When the filters are dried, re-install the filter in the reverse order of the above procedure.

This filter removes the cooking odours.

A WARNING: Carbon filter should never be washed. It should be replaced ev- ery 4 months under normal usage.

You can procure carbon filter from Arçelik Authorized Dealers.

2.Take the carbon filter out from its seat by pulling it out.

3.Install the new carbon filter.

4.Install the aluminum filters.

Use a soft cloth soaked with liquid detergent to clean the outer surface of your hood.

A WARNING: Never use abrasive or scratching materials for cleaning.

12 / 13 EN	Hood / User Manual