4Electrical Connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum).

Attention!

If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability.

For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

AWarning

This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people.

Built-under installation

This appliance can be installed under a worktop.

AUndercounter installation without the top cover must only be carried out by an authorised agent.Risk of electric shock.

A Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Green and yellow

or green

N

L

Blue or black

Brown or red

 

Washer/dryer combination

Do not stack washing machine on top of the tumble dryer. This would damage both appliances and guarantees would become void. It is also unsafe to stack an appliance on top of another without using a suitable and approved stacking kit obtained from the manufacturer of the appliances.

10

EN

Page 10
Image 10
Beko DCU 9330 manual Electrical Connection, Electrical requirements

DCU 9330 specifications

The Beko DCU 9330 is a highly efficient condenser tumble dryer that stands out in the crowded market of household appliances due to its impressive features and performance. Designed with modern households in mind, this dryer offers a blend of technology and practicality to simplify laundry tasks.

One of the key features of the Beko DCU 9330 is its spacious 9 kg drying capacity, which makes it ideal for larger families or those who frequently deal with bulkier items such as bedding and towels. This capacity allows users to dry more laundry in a single load, thus saving both time and energy.

Equipped with the latest Sensor Drying technology, the Beko DCU 9330 automatically detects the moisture level in the clothes, adjusting the drying time accordingly. This feature not only prevents over-drying, but also ensures that garments are dried evenly and efficiently, helping to extend the lifespan of fabrics. Users can select from various drying levels, such as Iron Dry, Hanger Dry, or Extra Dry, depending on their needs.

The appliance also features a range of 15 programs tailored for different fabric types. From delicate silks to robust cottons, the Beko DCU 9330 ensures optimal care for all materials. Additionally, the Woolmark Blue certification indicates that wool garments can be safely dried without any risk of damage.

Energy efficiency is another highlight of the Beko DCU 9330, boasting an impressive energy rating that helps reduce running costs. This is achieved through its advanced heat pump technology, which recycles hot air during the drying process, minimizing energy wastage. As a result, this dryer is not just economical in operation but also environmentally friendly.

The Beko DCU 9330 is designed with user convenience in mind, featuring a clear LED display that allows for easy monitoring and selection of cycles. The large door opening facilitates effortless loading and unloading of laundry, while the innovative AquaWave drum design ensures that clothes move gently to prevent tangling and creasing.

Maintenance is straightforward thanks to the self-cleaning condenser, which ensures optimal performance without the need for frequent manual cleaning. With its combination of efficiency, capacity, and thoughtful design, the Beko DCU 9330 represents a premium choice for those looking to elevate their laundry experience. Whether managing large laundry loads or providing careful treatment for delicate items, this tumble dryer delivers on all fronts.