Canceling a programme
You need to perform a canceling operation if you want to end a programme before it is over. To cancel a programme:
Deactivate the key lock if it is active. “Paused” is displayed if you press the Start/Pause/Cancel key when the key lock is deactivated. If you continue to keeping the Start/Pause/Cancel key pressed, the countdown of 5 seconds starts and the following messages are displayed consecutively:
“Cancel 5” “Cancel 4” “Cancel 3” “Cancel 2” “Cancel 1” “Cancel”
Release the key at the end of the countdown.
The message
“Cancelling”
is displayed for 45 seconds during the discharge operation.
“Cancelled”
will be displayed when the operation is completed. In this case, you can turn off your machine with the “On/Off” key or make it ready for the next cycle by pressing the “Start/Pause/Cancel” button.
WARNING:
There might be residues of detergent or rinse aid in the machine and/or on the pieces already washed depending
24
on the step the cancelled programme was in at the end of such cancellation.
Programme Step Follow-up
You can follow up the washing step of the current programme by means of the warning notes on the display.
“Washing”
is displayed for the steps at which the food remnants are removed or a washing with detergent is made.
The degree of soiling of the dishes is determined by measuring the degree of soiling in the washing water by means of the cleanliness sensor. The cleanliness sensor determines what to do in the following steps by measuring the degree of soiling of the water regularly. Washing temperature, washing time, washing pressures and water amount is adjusted on basis
of the information received from the cleanliness sensor. This programme is developed to avoid unnecessary water and energy consumption by washing the dishes in the most appropriate conditions for the degree of soiling of the dishes.
“Analysing”
is displayed during the decision steps.
The analysis is made during the first
GB