Beko GL22APW, GNEV220S Installation, Before operating your, refrigerator, Points to be considered

3	Installation
C	Please remember that the	Before operating your
manufacturer shall not be held liable if		refrigerator
the information given in the instruction		Before starting to use your refrigerator
manual is not observed.
		check the following:
Points to be considered
		1. Is the interior of the refrigerator dry
when re-transporting your
		and can the air circulate freely in the
refrigerator
		rear of it?
1. Your refrigerator must be		2. Clean the interior of the refrigerator as
emptied and cleaned prior to any
		recommended in the “Maintenance
transportation.
		and cleaning” section.
2. Shelves, accessories, crisper and etc.		3. Plug the refrigerator into the wall
in your refrigerator must be fastened
		outlet. When the door is open the
securely by adhesive tape against any
		respective interior light will come on.
jolt before repackaging.
		4. You will hear a noise as the
3. Packaging must be tied with thick
		compressor starts up. The liquid and
tapes and strong ropes and the
		gases sealed within the refrigeration
rules of transportation printed on the
		system may also give rise to noise,
package must be followed.
		even if the compressor is not running
C Always remember...		and this is quite normal.
Every recycled material is an		5. Front edges of the refrigerator may
indispensable source for the nature
		feel warm. This is normal. These
and for our national resources.
		areas are designed to be warm to
If you wish to contribute to recycling		avoid condensation.
the packaging materials, you can		Electric connection
get further information from the		Connect your refrigerator to a
environmental bodies or local
		grounded socket which is being
authorities.
		protected by a fuse with the
		appropriate capacity.

7

EN