| 3 | Installation |
|
|
| B | Please remember that the | 4. When the compressor starts to | |
|
| manufacturer shall not be held liable if | ||
|
| operate, a sound will be heard. The | ||
|
| the information given in the instruction | ||
|
| liquid and gases sealed within the | ||
|
| manual is not observed. | ||
|
| refrigeration system may also give rise | ||
|
|
| ||
| Points to take notice of when | to noise, even if the compressor is | ||
| relocating your refrigerator | not running and this is quite normal. | ||
| 1. Your refrigerator should be | 5. Front edges of the refrigerator may | ||
| feel warm. This is normal. These | |||
|
| unplugged.Before transportation of | ||
|
| areas are designed to be warm to | ||
|
| your refrigerator, it should be emptied | ||
|
| avoid condensation. | ||
|
| and cleaned. | ||
|
| Electrical connection | ||
| 2. Before it is | |||
|
| accessories, crisper, etc. inside | Connect your product to a grounded | |
|
| your refrigerator should be fixed | ||
|
| socket which is being protected by a | ||
|
| with adhesive tape and secured | ||
|
| fuse with the appropriate capacity. | ||
|
| against impacts. Packaging must | ||
|
| Important: | ||
|
| be adequate to protect the product | ||
|
| The connection must be in compliance | ||
|
| and the transportation rules on the | ||
|
| with national regulations. | ||
|
| package should be strictly observed. | ||
|
| • The power plug must be easily | ||
| 3. Original packaging and foam | |||
| accessible after installation. | |||
|
| materials should be kept for future | ||
|
| • Electrical safety of your refrigerator | ||
|
| transportations or moving. | ||
|
| shall be guaranteed only if the earth | ||
| Before you start the | |||
| system in your house complies with | |||
| refrigerator, | standards. | ||
| Check the following before you start | • The voltage stated on the label | ||
| located at left inner side of your | |||
| to use your refrigerator: | |||
| product should be equal to your | |||
| 1. Attach 2 plastic wedges as illustrated | |||
| network voltage. | |||
|
| below. Plastic wedges are intended | ||
|
| • Extension cables and multi plugs | ||
|
| to keep the distance which will ensure | ||
|
| the air circulation between your | must not be used for connection. | |
|
| refrigerator and the wall. (The picture | B A damaged power cable must be | |
|
| is drawn up as a representation and it | replaced by a qualified electrician. | |
|
| is not identical with your product.) | ||
|
| B Faulty product must not be operated | ||
| 2. Clean the interior of the refrigerator as | |||
|
| recommended in the “Maintenance | before it is repaired! There is the risk | |
|
| of electric shock! | ||
|
| and cleaning” section. | ||
|
|
|
| |
| 3. Connect the plug of the refrigerator |
|
| |
|
| to the wall socket. When the fridge |
|
|
|
| door is opened, fridge internal lamp |
|
|
|
| will turn on. |
|
|
7
EN