ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply. Rating plate is affixed on the left hand side of inner liner We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

TRANSPORTATION INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, the product must only be laid on its left hand side (when facing the door front) and it must not be operated for at least 4 hours to allow the system to settle after the appliance is brought back to upright position.

3.Failure to comply with the above instructions could result in damage occurring. to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section ‘Defrosting’ and ‘Care & cleaning’ for further information.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol

 

or coloured

green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

GREEN &

 

 

 

 

6mm.

YELLOW

 

 

OR

 

GREEN

32mm.

 

L

 

 

 

BROWN

6mm.

 

 

 

N

 

 

OR

 

 

22mm.

RED

 

BLUE

 

 

 

6mm.

 

 

12mm.

OR

 

 

 

 

 

 

BLACK

 

 

 

 

CORD GRIP

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

appliance as you might injure your fingers and hands.

IMPORTANT : This appliance is not designed for stacking with any other appliance.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

"IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged."

Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

4

Page 2 Page 4
Page 3
Image 3
Beko TLDA 625 manual Electrical Requirements, IMPORTANT! Fitting a Different Plug
Page 2 Page 4

TLDA 625 specifications

The Beko TLDA 625 is a versatile and efficient refrigerator designed to meet the modern needs of consumers for both style and functionality. With a sleek and elegant design, this refrigerator not only enhances your kitchen aesthetics but also provides ample storage space for all your refrigeration needs.

One of the main features of the Beko TLDA 625 is its impressive capacity. With a total gross volume of 625 liters, this model offers plenty of room for your groceries, ensuring you can store a variety of items without the hassle of cramped spaces. The appliance is thoughtfully designed with adjustable shelves, which allows users to customize the interior layout according to their specific storage requirements.

Energy efficiency is a key characteristic of the Beko TLDA 625. It is rated with an A++ energy efficiency class, meaning it consumes less energy compared to conventional refrigerators. This not only helps reduce electricity bills but also contributes positively to the environment by lowering carbon footprints.

In terms of technology, the Beko TLDA 625 comes with innovative cooling features. The No Frost technology eliminates the need for manual defrosting, ensuring that frost does not accumulate, which can lead to inefficiency and a loss of storage space. This feature ensures that your food stays fresh and that the appliance operates at optimal efficiency.

Another significant technology incorporated into the Beko TLDA 625 is the Active Fresh Blue Light feature, which helps maintain the freshness of fruits and vegetables. By simulating natural sunlight, this technology helps preserve vitamins and nutrients, ensuring that your produce stays healthy and flavorful for longer periods.

The refrigerator also includes an impressive water and ice dispenser, which provides instant access to chilled water and ice cubes, enhancing convenience for daily use. Additionally, users can benefit from the advanced cooling system that maintains consistent temperatures, ensuring food safety and quality.

Lastly, the Beko TLDA 625 is built with robust materials and comes equipped with advanced safety features, such as a door open alarm that notifies users if the door has been left ajar. This ensures food safety while prolonging the life of the appliance itself.

In summary, the Beko TLDA 625 is a high-capacity, energy-efficient refrigerator packed with modern technologies that cater to the demands of contemporary life. Its elegant design, combined with practical features, makes it a valuable addition to any home, ensuring that food is stored efficiently and remains fresh for longer. Whether for a busy family or an individual, this refrigerator is engineered to enhance your kitchen experience.
Top Page Image Contents