Amplifier Placement
eVo200.2 Placement Within Your System
The most typical arrangement places the eVo200.2 on the lower shelf of a rack or shelf unit; some users prefer to have the eVo200.2 on its own stand.
Whichever method is preferred, it is recommended to use a high quality type stand capable of dissipating vibration and resonance into the floor area.
Because the eVo200.2 runs so cool it can be placed in many system locations without compromise.
We do not recommend placing weights or other objects directly on the eVo200.2. This may mar or scratch the chassis finish. Dampen a soft cotton cloth with warm water for cleaning the outer surfaces.
Specifications
Power output per channel into 8 ohms • 120 watts <1% THD+N Power output per channel into 4 ohms • 200 watts <1% THD+N 800 watts short term continuous Mono
Bandwidth: + or - 3dB •
Input level for full stereo output • 2 Volts RMS
Signal to Noise Ratio @ 1 watt out • >96 dB A weighted, 20 kHz
Distortion @ 1 watt / 1kHz • <0.05%
Damping Factor • >100
Input configuration and impedance •
Stereo Mode Gain • 26 dB
Power Requirements •
Dimensions • 17.5" W x 14.5" D x 4.5" H (445 mm x 368 mm x 114 mm)
Weight • 30 lbs. (13 kg)
eVo200.2 Owner's Manual | Page 7 |
