Bel Canto Design eVo4 Design Features cont’d, Warm-Up, Do not connect power to this amplifier yet

Design Features (cont’d)

Feedback is taken before the LC filter and fed back to the digital power processor. This feedback is used to insure that any variations in the switching speed of each output device are compensated for, optimiz- ing the linearity of the output stage.

Warm-Up

The eVo amplifier’s sonic perform- ance will continue to improve over the first several weeks of operation. Because of the very low standby operating power we recommend continuous power-up unless the sys- tem is not to be used of an extended period. This will prolong the amplifi- er’s life and insure optimum perform- ance at all times..

Warning!

Do not connect power to this amplifier yet!

This amplifier, like any electrical component, can be dangerous and cause injury unless correct handling procedures are observed and used. Before powering this amplifier it is necessary to read and follow proper setup and use procedures. Do not open up your eVo amplifier (do not remove the chassis cover). There are no user serviceable parts inside. Any tampering of internal parts will imme- diately void your warranty.

Complete and mail the Owner's Registration Card immediately in order to activate your warranty.

© 2002-2004 bel canto design, Ltd. page 4 eVo User’s Guide 042104