Unpacking
Unpacking
The box containing your SET 40 contains the following parts:
1 - SET 40 User's Guide
1 - Power Cable for connection to utility power [6' 7" - 2 meters long]
1 - SET 40 audio power amplifier
2 - 845 power triodes in a protective box, these tubes may be shipped in a separate shipping container.
1 - Bel Canto Owner's Warranty & Registration Card
Carefully unpack each piece and check for shipping damage. If there is any damage, please contact your dealer or Bel Canto Design, Ltd. Save all packing materials as the packing is
specially designed to protect the amplifier during shipping or transporting. If you lose or damage the packing materials or carton, please contact your dealer or distributor before attempting to transport the amplifiers.
The SET 40 power supply is preset for the proper national voltages before you receive it. The power cable will have the correct plug for your local power system. If you believe this is not true, please contact your dealer immediately. Do not
attempt to alter or change power settings yourself!
!
Warning
Do not connect power to this amplifier yet!
This power amplifier, like any electrical component, can be dangerous and cause injury unless correct handling procedures are observed and used. Before powering this power amplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your SET 40 (do not remove the chassis covers). There are no user serviceable parts inside. Any tampering of internal parts will immediately void your warranty.
Complete and mail the Owner's Registration Card immediately in order to activate your warranty.
Page 4 | SET 40 Owner's Manual |
