Hookup and Installation
Step 4
Connect Digital Components to the Digital Filter
The PureAV Power Console PF40 contains an isolated Digital Filter that is optimized to clean and condition the power to all of your digital components. The Digital Filter also filters out noise created by digital components such as DVD players and isolates your digital components from connected video, audio, and
A. Attach PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the Power Console.
B.Digital Video Recorder – Connect your digital video recorder power cord to the outlet labeled “DVR”.
C.DVD – Connect your DVD power cord to the outlet labeled “DVD”.
D.Cable/Satellite – Connect your cable or satellite receiver power cord to the outlet labeled “Cable/SAT”.
E.HDTV – Connect your HDTV power cord to the outlet labeled “HDTV”.
Note: You can connect any type of digital component into any of the Digital Filter outlets. You are not limited to the components listed above.
PureAV Power Console
10