Belkin F1DL102P manual Introduction, Connecting the Keyboard, Video, and

P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 2

Introduction

This sheet will guide you through the basic steps needed to install the 2- Port KVM Switch with Audio Support and Built-In Cabling (the Switch). If you have any problems during installation, please refer to the User Manual.

Built-In Cables

Port Status

Indicator LEDs

Console

Speaker Jack

Console

Mouse Port

Console VGA

Monitor Port

Console	Console
Keyboard Port	Mic Jack

You will need the following items to install the Switch:

•2-Port KVM Switch with Audio Support and Built-In Cabling

•One (each) keyboard, monitor, and mouse

•Speakers and mic (optional)

1	Connecting the Keyboard, Video, and
	Mouse to the Console Ports on the Switch

1.Power down all computers.

2.Connect your PS/2-type keyboard and mouse to the purple keyboard and green mouse ports located on the front panel of your Switch.

3.Take the video cable that is attached to your monitor and connect it to the VGA port on the front panel of your Switch.