
P73240_F5F315-T_US_man.qxd 9/24/03 3:21 PM Page 2
To Test Coax Cable (BNC)
1.Plug one end of cable to the BNC socket of master unit and the other end to the BNC terminator included with the
2.Push the Power button to the ON position on the master unit. If the BNC LED illuminates, the cable is bad.
3.If the cable passes step 2, then push the BNC test button on the side of the master unit. The BNC LED will illuminate green if the cable is good. If it illuminates red, the cable is bad.
Pair Configurations For Cables
with Modular Connectors
2