IMPORTANT SAFETY INSTRUCTIONS

•This manual contains important instructions for Model F5C500, F5C510 and F5C520 that should be followed during installation and maintenance of the UPS and batteries. Please save this instruction manual.

•The unit is intended for installation in a temperature-controlled indoor area free of conductive contaminants.

•To reduce the risk of fire, connect only to a circuit provided with 20 amperes maximum branch circuit overcurrent protection in accordance with the National Electrical Code, ANSI/NFPA 70.

•Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the required precautions. Keep unauthorized personnel away from batteries.

Setting up your ReSource®

1.Plug ReSource® into a 3-prong grounded outlet. If the “Wiring OK” light does not light up please refer to the “Wiring OK” section below.

2.Plug your PC power supply and monitor power supply to the outlets marked “Instant Back Up Power Supplied”. Plug in any other devices that may require back up power in case of a utility power outage (e.g., external storage drive, or tape backup, external modem.)

3.Printers and other peripherals that are not crucial to battery back-up, but still need maximum surge protection should be plugged into the four remaining outlets that are opposite the Instant Back Up Power Supplied outlets. These outlets have full surge protection but are not powered by the battery during utility power outages.

4.The ReSource® comes with Solid State Phone/Fax/Modem surge protection. Instead of running a connection directly from your Phone/Fax/Modem to the wall jack, you must pass the connection through the protected jacks on your ReSource® . Connect your phone/fax/modem line from your wall outlet to the “Input” jack on ReSource® . Connect the 6-foot phone cord provided with ReSource® into the “Output” jack, and connect the other end of the phone cord to the Phone/Fax/Modem jack of the device you want to protect. If you fail to connect the Phone/Fax/Modem protection your connected equipment will not be covered by the Connected Equipment Warranty. Most modem damage can be prevented if you take the time to connect the Phone/Fax/Modem protection.

5.The ReSource® also comes with 10Base-T Network protection. Instead of running a connection directly from your network wall jack to your PC, you must pass the connection through the protected jacks on your ReSource® . Connect your RJ45 Network line (Category 5 cable) from your wall outlet to the "Input" jack on ReSource® . Connect the 5 foot long CAT 5 patch cable provided into the “Output” jack on ReSource® , and connect the other end to the Network connection on the back of your PC. If you fail to connect the Network protection when using ReSource® with a Network

your connected equipment will not be covered by the Connected Equipment Warranty.

6*.

Connect the RS232 cable to the ReSource® and your PC to utilize the shutdown software. (See: Installing Shutdown Software)

7.Switch on your ReSource® - the “Powered” light will come on. It will stay on as long as the switch remains on and power is supplied to the unit.

* For Models F5C510 and F5C520

Internet Ready

Solid state

phone/fax/modem

protection (6 ft. phone

cord included)

 

Communication Port

 

BlockSpace™

15 Amp re-settable circuit

Eight 3-line A/C

RS232 Serial Port

 

provides extra

breaker (Recessed for safety)

(For models F5C510 (450VA)

 

space for large A/C

 

surge protected

and F5C520 (600VA) only)

 

adapters

 

outlets

 

 

 

Heavy duty 6

 

 

 

 

 

 

 

 

 

 

 

foot cord

 

 

 

 

Heavy-duty, impact

 

 

 

 

resistant ABS case

 

 

 

 

Recessed MAIN

 

 

 

 

power switch helps

 

 

 

 

prevent accidental

 

 

 

 

shut-off

 

 

 

 

CHECK BATTERY

 

 

 

 

warns if the battery

 

 

 

 

needs replacement

 

 

 

 

WIRING OK lets you know the outlet ReSource®

 

Four battery back-up outlets

is plugged into is grounded correctly

 

provide running time

 

 

SURGE PROTECTED indicates the surge protection

is functioning properly

10Base-T network protection with RJ45 jacks.

(5 ft. CAT 5 cable included)

Page 2
Page 1
Image 1
Belkin F5C520, F5C510 important safety instructions Important Safety Instructions
Page 2

F5C520, F5C510 specifications

Belkin has established a reputation for offering high-quality networking products, and the F5C510 and F5C520 powerline adapters showcase this commitment. These devices enable users to extend their home network using existing electrical wiring, providing a reliable solution for areas of the home that may be difficult to reach with traditional Wi-Fi signals.

The Belkin F5C510, known for its user-friendly setup, allows users to create a wired network connection quickly and easily. By simply plugging the adapter into a wall outlet and connecting it to a router via an Ethernet cable, users can immediately expand their network. It features a sleek and compact design, ensuring it doesn’t obstruct other outlets. The F5C510 supports data transfer speeds up to 500 Mbps, which is suitable for streaming high-definition content, online gaming, and uninterrupted video conferencing.

On the other hand, the F5C520 builds upon the capabilities of the F5C510, offering enhanced performance with dual-band technology. It supports a higher data transfer rate of up to 1000 Mbps, making it an excellent option for larger homes or environments with multiple devices demanding high bandwidth. The F5C520 is designed with improved noise filtering and advanced technology, maximizing performance over the powerline network and minimizing interference from other electronic devices.

Both models incorporate encryption for security, utilizing 128-bit AES encryption to ensure that data transmitted remains protected against unauthorized access. They also come equipped with multiple Ethernet ports for connecting multiple devices, such as gaming consoles, smart TVs, and computers, directly to the adapter for a stable connection.

Additionally, these adapters are compatible with most routers and operate seamlessly across various operating systems. This interoperability makes them an ideal choice for users looking to enhance their internet experience without the need for extensive cabling or construction.

In conclusion, the Belkin F5C510 and F5C520 are powerline adapters that combine ease of use with reliable performance. With their sleek designs, impressive data transfer speeds, and robust security features, these devices are excellent choices for anyone seeking to improve their home network efficiently and effectively. Whether for casual web browsing or demanding streaming tasks, Belkin's offerings provide a dependable solution to keep you connected.
Top Page Image Contents