Belkin F5D4078 user manual Overview, Changing the Network Password

CONFIGURATION

Table of Contents sections 1

Overview

The Adapter uses 128-bit AES encryption to block access from the outside.. By default, the protection is enabled.. However, it is recommended that you change the default network password with the “Encryption” button located on the units..

2 3 4

Changing the Network Password

1.With both Adapters plugged into the wall, press the “Encryption” button on both units for 10 seconds.. The password on these Adapters has now been changed to a random value..

2.Next, press the “Encryption” button on one unit for more than 1 second, but less than three seconds..

3.Within two minutes, press the “Encryption” button on the second unit for more than 1 second, but less than three seconds..

4.The new network password has now been saved to the second unit.. The password will not be lost, even if the Adapters are unplugged from the wall..

Play Powerline HD Networking Adapter 7