Belkin F5D7000 user manual Manually Configuring Computer Network Settings

Manually Configuring Computer Network Settings

Manually Configuring Network Adapters in Windows 98SE or Me		1
		2
1. Right-click on “My Network Neighbourhood” and select
	“Properties” from the drop-down menu.
		3
2. Select “TCP/IP -> settings” for your installed network adapter.
	You will see the following window.
(1)		4
(3)		5
(2)
		6
		7
		8
3. If “Specify and IP address” is selected, your Router will need
		9
	to be set up for a static IP connection type. Write the address
	information in the table below. You will need to enter this
		10
	information into the Router.

4.Write the IP address and subnet mask from the “IP Address” tab (3).

5.Click the “Gateway” tab (2). Write the gateway address down in the chart.

6.Click the “DNS Configuration” tab (1). Write the DNS address(es) in the chart.

7.If not already selected, select “Obtain IP address automatically” on the IP address tab. Click “OK”.

Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Router.

section

83