14
Installing and Setting up the Adapter
14
B.5 A Setup Status screen lets you know
where you are in the setup process.
B.6 After the software installation is
finished, the message “Please plug
in your USB Adapter now” will
appear. Connect the Adapter to your
computer.
B.7 The Found New Hardware Wizard
might appear in 3–15 seconds. If
it does, select “Install the software
automatically” and click “Next” to
install the hardware.
B.8 If the Found New Hardware Wizard
does not appear, click “Finish”.
B.9 You might see a screen similar to this
one. This DOES NOT mean there is a
problem. Our software has been fully
tested and is compatible with this
operating system. Select “Continue
Anyway” and follow the
on-screen instructions.