Belkin F5U302 manual Setup for XP Users, Make sure you have the following package contents

Make sure you have the following package contents:

Wireless	Wireless USB	Adapter Stand	Power
USB Hub	Adapter	(optional)	Supply

Mini-USB Cable	Installation	Quick
(A to Mini-B)	CD	Installation
		Guide

Setup for XP Users

1.Insert the Belkin driver-installation CD into your CD-ROM drive. After a few moments, the setup application should appear on your computer screen.

Note: If the setup application does not appear, double-click “My Computer”, and then click your CD-drive icon. This will load the setup-applications main page.

2.Click “Install driver” and follow the prompts to complete the software-install process.

3.a. Connect the power supply to the Hub.

b.Attach the mini-USB cable to the mini-USB port on the side of the Hub and the other end to your computer’s built-in USB port (Fig. 1). This will allow your computer to recognize the Hub.

Fig. 1

(A) (B)

Connect the	Connect
power supply	mini-USB cable

4.Wait approximately one minute for security to become enabled. A prompt will indicate that the security setup is complete (Fig. 2).

Fig. 2

5.Once this process is complete, unplug and remove the mini-USB cable from the Hub and computer. This cable is needed only on the first installation. Store the USB cable for another computer installation if desired.

6.Connect the Wireless USB Adapter to your computer’s USB port.

Windows will automatically find and load drivers to complete installation (Fig. 3).

Fig. 3

Laptop setup or desktop

7.Plug your USB devices into the Hub and access them wirelessly (Fig. 4).

Fig. 4

Up to 30 ft. in the same room	Now you can print, play music, scan, download photos and burn CDs from anywhere
	in the same room, up to 30 feet away, without the hassle of connecting cables. With
	the Belkin Wireless USB Hub, you have the freedom to roam and stay connected.

Package Contents

1 Setup for XP Users

2 Setup for XP Users

3