27
TROUBLESHOOTING
Link LED is blinking slowly; I cannot connect
to a wireless network or the I nternet.
If your Adapter appears to be functioning properly, but you cannot
connect to a network or you have a re d wireless icon at the bot tom of
your screen, the problem may be that there is a mismatch between the
network name (SSID) settings in your wireless network properties.
Check the SSID settings to se e if they match. The SSID
is case-sensitive and the spelling on each computer
mustbeexactlythesameinorderfortheAdapterto
connect to the wireless router (or access point).
Note: To check the SSID settings or look for a n available
network, double-click the Signal Indicator icon to bring up the
“Wireless Networks” s creen. Click “Add” if you do not s ee the
network you are trying to co nnect to and type in the S SID.
For more information about setting up an SSID, please reference
yourroutermanufacturer’susermanual.Ifissuespersisteven
at close range, please contact Belkin Technical Support.
Link LED is solid but I cannot co nnect to the Internet .
Ifyouhaveasignalbutcan’tgetonlineorobtainanIPaddress,the
problem may be that there is a mismatch between the encryption key
settings in your computer and wireless router (or access point). Check
theWEP,WPA,orWPA2keysettingstos eeiftheymatch.Thekeyi s
case-sensitive and the spelling on each computer and wireless router
(oraccesspoint)mustbeexactlythesameinorderfortheAdapter
to connect to the router. For more information about encryption,
please see the “Connecti ng to a Secure Wi-Fi Net work” section.
If issues persist even at close range, please
contact Belkin Technical Support.