56
Using the Web-Based Advanced User Interface
5756
1. Wi-Fi Protected setup (WPs): enabled or disabled.
2. Personal identification Number (PiN) method: in this method, a
wireless client wishing to access your network must supply a
4- or 8-digit PiN to the router. After clicking “enroll”, you must
start the WPs handshaking procedure from the client within
two minutes.
3. router PiN: if an external registrar is available, you may enter
in the router’s PiN to the registrar. Click “Generate New PiN”
to change the PiN from the default value. Click “restore default
PiN” to reset the PiN value.
4. Push Button Configuration (PBC) method: PBC is an alternate
method to connect to a WPs network. Push the PBC button
located on the back of the router for three seconds, and then
initiate the PBC on the client device. Alternatively, push the
“start PBC” soft button to start this process.
5. manual Configuration method: this section lists the default
security settings if not using WPs.
the router features WPA2, which is the second generation of the
WPA™ based 802.11i standard. it offers a higher level of wireless
security by combining advanced network authentication and stronger
Advanced encryption standard (Aes) encryption methods.