Belkin N1 manual Hardware Connections continued, Setup Assistant, Support

Step 1 - Hardware Connections (continued)

D

Plug in your modem’s power cord.

Wait 60 seconds for the modem to start up.

Plug the Router’s power supply into the black port on the back.

Plug the other end into the wall outlet.

Support

Belkin provides free technical support via phone and the Web. However, we encourage you to attempt (or retry) Steps 1 and

2 before contacting Support. The Setup Assistant has built-in intelligence to help diagnose and fix common problems.

If you’re still having trouble, contact Belkin Support.

UK	http://www.belkin.com/uk/
	Click on Support Centre >
	Networking Support
	0845 607 7787

E

Wait 20 seconds for the Router to start up.

Look at the display on the front of the Router.

Make sure the “Wired” and “Router” icons are lit up in blue.

If they are not, recheck your connections.

Step 2 – Setup Assistant

Insert the CD into your computer.

The Setup Assistant will automatically appear on your computer’s screen.

Follow the instructions there.

© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

P75168uk

F5D8231uk4