Belkin PM01116EA user manual Setting WPA Security, Setting WPA-PSK

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Setting WPA Security

Note: To use WPA security, your wireless network cards must be equipped with software that supports WPA. At the time this User Manual was published, a security patch from Microsoft is available for free download. This patch works only with Windows XP.

Your Router supports WPA-Personal (PSK), which uses what is known as a pre-shared key (PSK) as the security key. A pre-shared key is basically a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or characters. Each client uses the same key to access the network. Typically this is the mode that will be used in a home environment.

Setting WPA-PSK

1.From the “Security Mode” drop-down menu, select “WPA/WPA-Personal (PSK)”.

2.For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up.

3.Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up.

4.Click “Apply Changes” to finish. You must now set all clients to match these settings.

G+ MIMO Wireless Router 46