Step 4 Select Tone/Pulse Dialing Mode
Depending on your dialing system, set the Dial Mode switch as follows:
If your dialing system is: | Set switch to: |
Tone | T |
Pulse | P |
If you are not sure of your dialing system, make a trial call with the Dial Mode switch set to T. If the call connects, leave the switch as is; otherwise, set to P.
PT
PULSE/TONE
Step 5 Programming Your Voice Mail Access Number
If you subscribe to Memory Call voice mail service through BellSouth, you can automatically dial your Voice Mail access number with a touch of the MESSAGE key.
To program your Voice Mail access number:
a)When the MESSAGE key is first pressed, the display will show
ENTER PHONE NUM.
b)Enter the Voice Mail access number exactly as you would normally dial it to retrieve your voice messages.
c)Press the MESSAGE key again to store the number in memory. The display will show NUMBER STORED.
To change your Voice Mail access number previously stored in memory, press and hold the MESSAGE key until the display shows ENTER PHONE NUM. Then enter the new number and press the MESSAGE key again to store it in memory.
Once the number is stored, simply lift the handset, wait for dial tone and press the MESSAGE key. The phone will automatically dial your Voice Mail access number.
I N S T A L L A T I O N W I T H A T E L E P H O N E A N S W E R I N G M A C H I N E
OUTLETJACK
PHONE
ANSWERING MACHINE
8 | 9 |
