TechnicalBulletin
Bulletin No.: | Effective Date: 5/15/83 | Cancels: N/A | Page: 1 of 1 |
Subject: INSTRUCTION SHEET AMENDMENT CRUISE CONTROL
KIT 209893 FREIGHTLINER CAB-OVER ENGINE
The purpose of this bulletin is to emphasize the importance of the position of the two ¼”
–20 X ¾” cap screws referred to on Page 7, Instruction 7 and illustrated in Figure 5 of
These two bolts must be installed as shown, with head of bolt on the backside of the throttle lever bracket to allow for adequate clearance throughout the entire travel of the bell crank.
