Introduction
10
Controls and functions

Projector

6. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 27 for
details.
Activates the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 28 for details.
7. TEMP indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 67 for details.
8. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 67 for
details.
9. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
26 for details.
10. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 31 for
details.
1. Power/POWER indicator light
Toggles the projector between standby
mode and on.See "Starting up the
projector" on page 25 for details.
Lights up or flashes when the projector is
under operation. See "Indicators" on page
67 for detail.
2. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
3. Volume/Arrow keys ( / Left, /
Right)
Adjusts the sound level.
When the On-Screen Display (OSD) menu
is activated, the #3 and #6 keys are used as
directional arrows to select the desired
menu items and to make adjustments. See
"Using the menus" on page 28 for details.
4. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page 34
for details.
5. Eco Blank
Press the Eco Blank button to turn off the
image for a period of time with 70% lamp
power saving. Press again to restore the
image and sound. See "Hiding the image"
on page 39 for details.
6
5
4
8
3
10
7
3
2
9
6
1
I
I