Operation 39
Press MODE/ENTER. A confirmation message displays.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message
“Timer is Off!” displaying on the screen.

How to use the Timer On key?

Timer On is a multi-functional key.
• If the presentation timer is off, pressing this key displays a
confirmation message. You can decide whether to
activate the timer or not by following the on-screen
instruction.
• If the timer is already on, pressing this key displays a
confirmation message. You can decide whether to restart,
continue or turn off the timer by following the on-screen
instruction.
Remote paging operations
Connect the projector to your PC or notebook with a USB
cable prior to using the paging function. You can operate your
display software program (on a connected PC) which
responds to page up/down commands (like Microsoft
PowerPoint) by pressing Page Up/Down on the remote
control.
If remote paging function doesn't work, check if the USB
connection is correctly made and the mouse driver on your
computer is updated to the latest version.
Hiding the image
Press the Eco Blank button from projector or
remote control to turn off the image for a period of
time with 70% lamp power saving. Press any key on
the projector or remote control to restore the
image. The word "Eco Blank" appears at the screen
while the image is hidden. When this function is
activated with an audio input connected,the audio
can still be heard.
You can set the blank time in the SYSTEM SETUP: Basic > Operation Settings >

Eco Blank Timer menu to let the projector return the image automatically after a

period of time when there is no action taken on the blank screen. The length of time can
be set from 5 to 30 minutes in 5-minute increments.
• Do not block the projection lens from projecting as this could cause the blocking object to
become heated.
• No matter Eco Blank Timer is activated or not, you can press any key (except the Page Up/
Down key) on the projector or remote control to restore the picture.