BenQ PB7200/ PB7220/ PB7100 User’s Manual
External Control Panel
1Power
Presses the Power key to turn the projector on or off.
2Source
Selects signal sources from among RGB- 1,
3 Left 4 Exit 5 Right 6 Menu
Menu will display the menu system on screen. Press Menu again to access the
Press the Exit button to go back to the main menu. Press Exit again to leave the menu system.
7Auto
Automatically determines the best picture settings for current received signals.
8Blank
Uses Blank to hide the screen image. You can unseal the image gradually by using the mouse of the remote control, or simply press Blank to turn on the image immediately.
9Power indicator
It will light up or flash when the projector is under operation.
10Temp indicator
The Temp indicator will flash when the system temperature is too high, which may occur if the projector is operated improperly. See "Temp Information" on page 24 for more detailed information.
11Lamp indicator
The Lamp Indicator will light up when the lamp needs service or replacement. See “Lamp Information” on page 22 for more detailed information.
4 Introduction