Mastering
Your
BERNINA®
BERNINA® Sergers
MASTERING YOUR BERNINA® SERGER 2/15/03 104
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA® Dealers
Multi-Purpose Foot with Guide -
Creating & Attaching Corded Piping
Following the instructions in your owner’s manual, thread the serger for
a 4-thread overlock stitch using both needles. Adjust settings for a
balanced stitch.
Set stitch length to 3mm.
Attach the Multi-Purpose Foot and Guide following the directions in the
instruction manual for the Multi-Purpose Foot with Guide. Note: 700D
and 800DL also need the Attachment Base.
Place the 3” x 8” fabric under the foot.
Insert the cord into the guide.
Wrap the bias strip around the cord and place the wrapped cord in the
groove under the foot and on top of the other fabric.
Serge, making the covered cord and attaching it to the fabric strip in
one stitching.
Press the seam allowance to the wrong side of the fabric strip.
Mount the sample.
Fabric .........................................mediumweight cotton bias strip, 2” x 8”
.................................................................. mediumweight cotton, 3” x 8”
Other ................................................... 12” length of 3/8” cotton filler cord
Needle............................................................................. 80/12 Universal
Thread................................................................... 4 cones serger thread
Presser Foot ........................................... Multi-Purpose Foot with Guide
Stitch ............................................................................4-thread overlock