Bertazzoni Models C36600X Z36 6 00 X C3Y0..U4X2 or 5A, Models C36500X Z36, C3W0..U4X2 or 5A

Models C36600X (Z36 6 00 X) [C3Y0..U4X(2 or 5)A]

Adapting to different types of gas

Burner	Position	Injector	Gas	Pressure	Max Rate		Min Rate		By-pass
		diam. [mm.]	Type	[i.w.c.]	[BTU/h]	[W]	[BTU/h]	[W]	diam. [mm]
Auxiliary	Front R	0,90	NG	4”	3400	996	900	264	Regulated
		0,54	LP (Propane)	11”	3400	996	900	264	0,29
Semi-Rapid	Rear L & C	1,18	NG	4”	6100	1787	1500	439	Regulated
	Front C	0,70	LP (Propane)	11”	6100	1787	1500	439	0,36
Rapid	Rear L	1,55	NG	4”	10400	3047	2500	732	Regulated
		0,92	LP (Propane)	11”	10400	3047	2500	732	0,47
Dual Burner	Front L Inner	0,80	NG	4”	2800	820	900	264	Regulated
		0,49	LP (Propane)	11”	2800	820	900	264	0,29
	Front L Outer	N°2 x 1,15	NG	4”	12000	3516	4500	1318	Regulated
		N°2 x 0,70	LP (Propane)	11”	12000	3516	4500	1318	0,65

Models C36500X (Z36 5 00 X)				[C3W0..U4X(2 or 5)A]
Adapting to different types of gas
Burner	Position	Injector	Gas	Pressure	Max Rate		Min Rate		By-pass
		diam. [mm.]	Type	[i.w.c.]	[BTU/h]	[W]	[BTU/h]	[W]	Diam. [mm]
Auxiliary	Front R	0,90	NG	4”	3400	996	900	264	Regulated
		0,54	LP (Propane)	11”	3400	996	900	264	0,29
Semi-Rapid	Rear L and R	1,18	NG	4”	6100	1787	1500	439	Regulated
		0,70	LP (Propane)	11”	6100	1787	1500	439	0,36
Rapid	Rear L	1,55	NG	4”	10400	3047	2500	732	Regulated
		0,92	LP (Propane)	11”	10400	3047	2500	732	0,47
Dual Burner	Centre Inner	0,80	NG	4”	2800	820	900	264	Regulated
		0,49	LP (Propane)	11”	2800	820	900	264	0,29
	Centre Outer	N°2 x 1,15	NG	4”	12000	3516	4500	1318	Regulated
		N°2 x 0,70	LP (Propane)	11”	12000	3516	4500	1318	0,65

CAUTION: save the orifices removed from the appliance for future use

Regulation of burners

Work surface burner adjustment: follow the instructions below to adjust the work surface burner minimum:

1)Light the burner and set the knob to the MINIMUM position (small flame).

2)Remove the knob of the valve that is press fit on the rod of that valve.

3)The cooker is equipped with safety valves, use a small slotted screwdriver the choke valve located on the valve body and turn the choke screw to the right or left until the burner flame is adjusted to minimum

4)Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position.

WARNING: The above-mentioned adjustment should be made only for natural gas, while for operation with liquid gas the screw must be locked at the end in a clockwise direction. The grill burner always operates at maximum and therefore no minimum adjustment is required.

9