CONTENTS:

INSTALLER TECHNICAL MANUAL

pg. 2

Installing the cooker - Installation information

pg. 2

Ventilation and aeration of rooms

pg. 3

Height adjustable legs

pg. 3

Backguard installation instruct

pg. 3

Gas connection

pg. 3

Adaptation to different types of Gas and burner adjustments

pg. 3-4

Electric connection

pg. 4-5

APPLIANCE MAINTENANCE - Replacing parts

pg. 5

USE AND MAINTENANCE MANUAL

pg. 6

Description of control panel and control types

pg. 6

Using burners

pg. 6-7

Using the gas oven

pg. 7-8

Using the electric thermostat

pg. 8

Using the 2+0 switch

pg. 8

Using the thermostat with switch in series

pg. 8

Using the 9+0 switch

pg. 9

Using the natural conventional electric oven

pg. 9-10

Using the ventilated electric oven

pg. 10

Using the electric grill - ventilated electric grill

pg. 11

Using the self cleaning oven

pg. 11

Cleaning the appliance

pg. 11

After-sales technical service and spare parts

pg. 12

THIS APPLIANCE HAS BEEN DESIGNED FOR NON-PROFESSIONAL DOMESTIC USE.

INSTALLER TECHNICAL MANUAL

This appliance is marked according to the European directive 2002/95/EC

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).

This guideline is the frame of a European-wide validity of return and recycling on Waste Electrical and Electronic Equipment.

INSTALLER INFORMATION

The installation, all adjustments, transformations and maintenance listed in this part of the manual must be carried out only by skilled personnel.

Improper installation may cause damage to persons, animals or property, for which the manufacture will not be held responsible.

The appliance safety or automatic adjustment devices may be changed during the service life of the system only by the manufacturer or by the duly authorised supplier.

INSTALLING THE COOKER

After having removed the various loose parts from the internal and external packing, make sure that the cooker is not damaged. In case of doubt, do not use the appliance and contact skilled personnel.

Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children.

The appliance can be installed as a freestanding unit, next to a or inserted between two walls (Fig.1). A single sidewall that exceeds the height of the work surface is possible. This must be at a minimum distance of 70 mm from the edge of the cooker (Fig. 1)

Any walls of the adjacent furniture pieces and the wall behind the cooker must be made with heat-resistant material that can withstand a minimum overtemperature of 65 K.

WARNING: the connection to the gas network must only use metal flexible pipes that conform with the national standards in force.

IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE

The cooker can be installed separately, as a freestanding unit, or between kitchen units or between a kitchen unit and the wall. The device must be installed in accordance with the regulations stated in UNI 7129 and UNI 7131 standards.

This appliance is not connected to devices which exhaust combustion products.

Special attention must be focused on the prescriptions described below regarding room aeration and ventilation. Any hanging cabinets installed above the work surface must be located at a distance of no less than 700 mm.

2

Page 2
Image 2
Bertazzoni M93V Contents, Installer Information, Installing the Cooker, Important Information for Installing the Appliance