Cleaning and Maintenance
Cleaning is the only maintenance action that is required normally.
Warning! Cleaning must be done with the warming drawer disconnected from the electrical power supply. Remove the plug from the power socket or disconnect the warming drawer power supply circuit.
Do not use aggressive or abrasive cleaning products, abrasive sponges or pointed objects since stains or abrasion marks may appear.
Do not use high pressure or steam jet cleaning appliances.
Appliance front and control panel
The warming drawer can be cleaned using just a damp cloth. If it is very dirty, add a few drops of
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted warming drawers, special products for treatment of stainless steel surfaces can be used. These products prevent the surfaces becoming dirty again for some time. Apply a thin layer of such a product on the surface using a soft cloth.
On aluminium fronted warming drawers use a gentle glass cleaning product and a soft cloth that does not release fluff. Wipe horizontally without pressing on the surface since aluminium is sensitive to scratches and cuts.
EN
Interior of the warming drawer
Clean the inside of the warming drawer regularly using a damp cloth. If it is very dirty add a few drops of
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air circulation opening.
Only use the warming drawer again when it is completely dry.
Mat with non-slip surface
The
The mat can be cleaned by hand using hot water with a few drops of
Dry thoroughly.
The
11
