INSTALL THE DUCTWORK

NOTE: To reduce the risk of fire, use only metal ductwork.

1.Decide where the ductwork will run between the hood and the outside.

2.A straight, short duct run will allow the hood to perform most efficiently.

3.Long duct runs, elbows, and transitions will reduce the performance of the hood. Use as few of them as possible.

4.Install a roof or wall cap. Connect 8" round metal ductwork to cap and work back to- wards hood location. Use duct tape to seal the joints between ductwork sections.

ROOF CAP

8” ROUND

DUCT

8” ROUND

ELBOW

EAVE

VENT

HOOD DECORATIVE

FLUE

24” TO 30” ABOVE

COOKING SURFACE

INSTALL SUPPORT SYSTEM

1.At hood location, install 2 x 4 cross framing between ceiling joists using dimensions shown.

2.Finish the ceiling surface. Be sure to mark the location of the ceiling joists and cross framing.

3.Position the support frame so that the support frame opening is on the long side of the hood.

4.Secure the upper half of support frame to joists and cross framing with four screws (6x70mm) and four washers (D.6.4mm). Make sure screws are driven into center of joists and framing for maximum strength.

5.Adjust the overall height of the support frame. Loosen and re-tighten the 4 screws in the height adjustment slots as necessary. Insert 4 screws (3.9x9.5mm) and 4 washers (D.4.5mm) located in the Hardware Package. Note that #4 screws and #4 washers can be located on the front, and #4 screws and #4 washers can be located on the opposite face (rear).

Note that the hood height is 13¾” and that the bottom of the hood must be 24” min. and 30” max. above the cooktop.

DRYWALL

CROSS FRAMING

107/8

 

 

 

 

CEILING

 

 

JOISTS

WASHERS

 

 

(Ø6.4mm)

 

MOUNTING

 

 

 

 

SCREWS

 

 

(6x70mm)

 

SUPPORT

FRONT

 

FRAME

 

HEIGHT

 

 

ADJUSTMENT

 

 

SLOTS

 

 

TOP VIEW OF SUPPORT FRAME 107/8

713/16

- 5 -

Page 5
Image 5
Best ISER222 manual Install the Ductwork, Install Support System

ISER222 specifications

The Best ISER222 is a cutting-edge device that has gained attention for its advanced features and innovative technologies. This sophisticated technology is designed for those seeking high efficiency and performance in their applications, particularly in fields like data analysis, telecommunications, and various industrial settings.

One of the standout features of the ISER222 is its exceptional processing power. Equipped with a state-of-the-art processor, this device is capable of handling complex computations swiftly, ensuring seamless operation even under high loads. The integration of multi-core technology allows it to perform simultaneous tasks efficiently, making it ideal for multitasking environments.

Another notable characteristic is its energy efficiency. The ISER222 is engineered with a focus on reducing power consumption without compromising performance. This dual approach not only lowers operational costs but also promotes sustainability, aligning with modern energy conservation goals. With a low thermal output, the device can operate in demanding conditions without overheating, thus extending its lifespan and reliability.

Connectivity is also a primary feature of the ISER222. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, ensuring compatibility with a wide range of devices and systems. This versatility facilitates easy integration within existing infrastructures, making it a popular choice for businesses looking to upgrade their technology.

The device also boasts an advanced user interface. The ISER222 comes equipped with a rich display that provides real-time feedback, making it user-friendly for both technicians and operators. Additionally, it features extensive diagnostic tools that help users monitor performance and troubleshoot issues proactively.

Security is paramount in today’s digital landscape, and the ISER222 addresses this with robust encryption technologies. These security features help protect sensitive data, making the device suitable for applications requiring stringent compliance with data protection regulations.

Lastly, the ISER222's modular design allows for easy upgrades and maintenance, ensuring that it can adapt to changing technological landscapes without requiring complete replacement. This focus on longevity and adaptability cements the ISER222's position as a leading choice for organizations looking for reliable, high-performance technology solutions. In conclusion, with its powerful processing capabilities, energy efficiency, versatile connectivity, user-friendly interface, strong security features, and modular design, the Best ISER222 stands out as a top-tier device in its class.