Best specifications K210A MODEL RANGE HOOD SYSTEM INTERIOR BLOWERS, K210A HOOD

- K210A MODEL RANGE HOOD SYSTEM -

INTERIOR BLOWERS-

Model 647	Model 634 or 644	Model 643
(7” Round wall cap)	(roof cap)	(8” Round wall cap)

Model 415	Model 418
	10” Round adjustable
7” Round adjustable	elbow (optional)
elbow (optional)
Model 407	8” Round
	standard
(7” Round—
	duct
2 ft sections)
Model 412
transition	Model 413	Model 459 transition
(3¼” x 10” to 7”)		(3¼” x 14” to 8”)
	transition

Standard	(3¼” x 10” to 8”)
3¼” x 10”
duct	Standard
	3¼” x 14” duct

Adapter and damper 3¼’’ x 10’’ (supplied with P5 and P8 blowers)

Flow deviator (vertical exhaust only)

(supplied with P5 and P8 blowers)

Adapter and damper

3¼’’ x 14’’ (supplied with P8 blower)

K210A HOOD

Rough-in kit (supplied with P5 and P8 blowers)

Model P5 single-blower (500 cfm)

Backsplash (RMP Series) (Stainless steel wall covering with warming shelves. Optional)

Model P8 dual-blower (900 cfm)

For use with 36” hoods or wider

NOTE: The dual blower P8 must be installed with 3¼” x 14’’ duct. If it is impossible to connect the dual blower P8 to a 3¼” x 14’’ duct, use a 3¼” x 10’’ duct. In that case, the

blower performance will be decreased by 25%.