3.Select the appropriate juice press. The small press piece is intended for fruit with little flesh. The larger press is placed on the smaller so that juice and flesh can be obtained (ideal for pressing larger fruit such as grapefruit etc.).
4.Place the sieve with the small press (or both presses) on to the motor spindle. The citrus press tongue and the juice collector handle must be in line with one another.
5.Insert the plug into the mains socket.
6.Place a glass under the spout.
7.To open the spout press it downwards.
8.Press a fruit half on to the press – the device starts automatically and stops when the fruit is removed. The alternating
9.Push up the spout before you remove the glass from beneath it. This ensures that the spout does not continue to drip.
10.When the citrus press is not needed any longer, pull out the plug and remove any fruit residue from the sieve.
Cleaning
1.Before cleaning always remove the plug from the mains socket.
2.Remove the press cone, juice filter and juice container from the device.
3.Press the spout fully downwards and clean it thoroughly. Note: The spout cannot be removed from the device.
4.Clean the press cone, juice filter and juice container under running water.
Note: These parts can be washed in a dishwasher. Place the parts in the upper basket of the dishwasher.
5.Clean the citrus press housing with a moist cloth only. To remove stubborn dirt put a little detergent on the cloth. Never use harsh cleaning or scouring agents.
Never immerse the motor housing in water or wash it under running water.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21,
EC low voltage regulations: | 73/23/EEC, 93/68 |
Electromagnetic compatibility: | 89/336 EEC, 92/31 |
Applicable harmonised standards: | EN 55014:2000 +A1, EN |
| EN |
| EN |
| +A14:1998 +A15:2000 +A16:2001 |
| EN |
Model type/Description: CITRUS PRESS BIFINETT KH 85
Bochum, 30.09.2002
Hans Kompernaß
- Managing Director -
5
