Passphrase: This is used to generate WEP keys automatically based upon the input
string and a pre-defined algorithm in WEP64 or WEP128. You can input the same string in
both the AP and Client card settings to generate the same WEP keys. Please note that you
do not have to enter Key (1-4) as below when the Passphrase is enabled..
Key (1-4): Enter the key to encrypt wireless data. To allow encrypted data transmission,
the WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format is in HEX style, 5 and 13 HEX codes
are required for WEP64 and WEP128 respectively, the separator is “-“. For example, using
WEP64, 11-22-33-44-55 is a valid key, whilst 1122334455 is invalid.
Hide ESSID: User can select Enable or Disable to hide ESSID.
4.3.1.4 DHCP Server
You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or
enable the router’s DHCP relay functions. The DHCP protocol allows your router to
dynamically assign IP addresses to PCs on your network if they are configured to obtain IP
addresses automatically.
To disable the router’s DHCP Server, check Disabled and click Next then click Apply.
37