VoIP/(802.11g) ADSL2+ Router
Chapter 2: Installing the router
The Rear Ports
31
6 5
The Ethernet Port # 4 can be connected to the computer and console. You need
a special console tool which is included in this package to connect the LAN
cable of Port 4 when connecting to a PC’s RS-232 port (9-pin serial port).
8 7 42
Port Meaning
1 Power Switch Power ON/OFF switch
2 Power Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the
device or restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this
is used when you can not login to the router, e.g. forgot
the password)
4
LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one
of the four LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
5 Phone
(RJ-11 connector) Connect RJ-11 cable to this port when connecting to an
analog phone set.
6 LINE Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
7 ADSL Connect the supplied RJ-11 (“telephone”) cable to this
port when connecting to the ADSL/telephone network.
8 Antenna
(Wireless router only) Connect the detachable antenna to this port.
8