Hardware Overview
BiPAC 7402NX(L) has 802.11n draft Wireless Access Point and Giga Switch Support.
The Front LEDs
Lit when power is ON. Lit red when POST (Power On Self Test) failure (not bootable) or device malfunctions
Lit green when the wireless | Lit green when |
connection is made. | successfully |
Flashes when sending/receiving data. | connected to an |
Flashes regularly when WPS is active | ADSL DSLAM |
| (“line sync”) |
Lit when connected to |
| |
an Ethernet device. |
| |
Green for 1000Mbps; | Lit green when the | |
Orange for 100Mbps. | USB device is ready. | |
Without shining for | ||
Flashes when | ||
10Mbps. | ||
sending/ receiving | ||
Blinking when data is | ||
| ||
Transmitted / Received | data. |
Lit green when IP connected.
Flashes green when IP connected and IP traffic is passing thru the device. Lit red when device attempted to become IP connected and failed
The Rear Ports
Connect the | Connect your computer |
detachable antenna | to a LAN port, using the |
| included Ethernet cable |
Press it to reset the device or restore to factory default settings
Connect the
supplied power
adapter to this jack
Connect the supplied | 3G/ HSDPA USB | Connect Console |
modem backup | cable | |
when connecting to the | for Internet |
|
ADSL/telephone | access |
|
Push WPS button to trigger
Power ON/ OFF switch
- 2 -
