16OPERATION continued

VERTI-CUTTING OPERATION

OVERSEEDING OPERATION continued

 

DO NOT- Use this machine on any surface other than a lawn. DO NOT- Use this machine on slopes in excess of 19°.

DO NOT- Allow persons unfamiliar with this equipment to operate it.

DO NOT- Allow children to operate this equipment.

MOW: Mow the lawn to it's normal cut height

DRY: Be sure grass is dry. Wet conditions can cause in- creased damage to healty grass.

SET DEPTH: With engine off, set the raking depth so that the blades just touch on a flat surface (i.e. driveway, or sidewalk).

START ENGINE: See Page 5.

ENGAGE BLADES: Pull back on the bail on the operators

handle. NOTE: When engaging the blades in heavy load conditions (i.e. heavy thatch, or very uneven turf), push down on the operators handle lifting the front wheels slightly. Engage the blades. Slowly lower the unit into the turf.

SLICE: Verti-cut a small test area and examine the results. Some thatch and cut stems should be removed and deposited on top of the healthy grass. Grass runners should be cut and ready for removal. If excessive damage occurs to healthy grass, adjust the blade depth to decrease damage. Continue raking the yard, working in one direction (i.e. north-south, or east-west). NOTE: If a large drop in engine RPM occurs, or the unit pulls you forward and bounces during operation the blade depth is set too low.

REMOVE THATCH/STEMS: After verti-cutting, a layer of thatch and cut stems will be deposited over the top of the lawn. We suggest the use of a lawn vacuum or wheeled blower for collection and removal of the thatch/stems.

OVERSEEDING OPERATION

DO NOT- Use this machine on any surface other than a lawn. DO NOT- Use this machine on slopes in excess of 19°.

DO NOT- Allow persons unfamiliar with this equipment to operate it.

DO NOT- Allow children to operate this equipment.

MOW: Mow the lawn to it's normal cut height

DRY: Be sure grass is dry. Wet conditions can cause in- creased damage to healthy grass.

SEED: Spred grass seed according to the seed suppliers directions (e.g. 10 lbs. per 1000 ft2 [4.5 kg. per 93 m2 ])

SET DEPTH: With engine off, set the raking depth so that the blades reach 1/4"-1/2"(6-12 mm) below a flat surface (i.e. driveway, or sidewalk).

START ENGINE: See Page 5.

ENGAGE CLUTCH: Pull back on the bail on the operators

handle. NOTE: When engaging the clutch in heavy load conditions (i.e. heavy thatch, or very uneven turf), push down on the operators handle lifting the front wheels slightly. Engage the clutch. Slowly lower the unit into the turf.

SLICE: Run machine over the area that has been seeded to incorporate the seed into the soil. If excessive damage occurs to healthy grass, adjust the blade depth to decrease damage. Continue raking the yard, working in one direction (i.e. north-south, or east-west). NOTE: If a large drop in engine RPM occurs, or the unit pulls you forward and bounces during operation the blade depth is set too low.

WATER/FERTILIZE: After the seed has been worked into the soil, water and fertilize according to the seed suppliers directions.

RAKING/SLICING TIPS

THATCH: Thatch is a dense layer of dead grass, clippings, and roots that builds up over time at the base of of the lawn preventing air, water, and fertilizer from reaching the soil.

This can cause shallow root development and make a lawn more susceptible to drought and disease. Thatch also provides an ideal environment for insects to hide and multiply. Periodic removal of thatch will keep your lawn in good health.

HEAVY THATCH: Lawns with an excessive amount of thatch will require multiple treatments for effective removal. Trying to remove excessive thatch (greater than 3/4"[19 mm] deep) in one treatment will damage or destroy the living part of the lawn. It is best to remove heavy thatch in seasonal treat- ments (i.e. spring, and fall).

CHECK: Before begining, it is best to evaluate the condi- tion of the lawn by cutting one or more core samples from area to be treated. A core can be cut using a piece of pvc, or metal pipe. Hammer the pipe into the ground, remove it, push the core out of the pipe and inspect it to determine the depth of thatch in your yard.

SLOPES: Rake slopes across not up and down. This is much easier and safer for the operator and is better for the lawn. Raking across will help to reduce runoff during watering and allow the sloped ground to hold more seed, fertilizer, and water. The units maximum operating slope is 35% or 19°.

DEPTH: The wide range of depth adjusment on your unit is provided to allow for blade wear. Setting the reel deeper will not produce better, or quicker results. The flail reel is intended to be set so it just touches the surface on flat ground. The slicing reel should be set even with the ground for verti-slicing work, and set to a maximum 1/2" depth for overseeding jobs. Setting the reel deeper than this will only result in premature wear on the unit (i.e. failed belt). If you desire to work the ground deeper than the above guidlines allow, it should be done gradually in multiple passes.

FOLDING HANDLE

This unit is equipped with a folding upper handle for easier storage and transportation. The handle can be folded by sliding the handle lock loops(item 28) up. This releases the upper handle, allowing it to be folded over the unit.

HANDLING & TRANSPORTING

This unit requires two people to lift it. With the handle in the folded position, lift holding the lower handle and belt/shaft guard one on each side of the machine. Secure the machine in place during transport.

Part No. 350245

Page 6 of 12

Form No. F011003A

Page 6
Image 6
Billy Goat CR450S, CR550, CR550HC, CR550H owner manual VERTI-CUTTING Operation, Overseeding Operation, RAKING/SLICING Tips

CR450S, CR550, CR550HC, CR550H specifications

The Billy Goat line of debris and lawn vacuums, including the CR450S, CR550, CR550HC, and CR550H models, is designed for both residential and commercial users seeking efficient and reliable outdoor cleanup solutions. These machines are renowned for their robust construction, powerful engines, and innovative features.

The CR450S is a compact model well-suited for smaller properties and tight spaces. It boasts a powerful 4.5 horsepower engine that ensures impressive suction capability. The vacuum's 27-inch wide nozzle allows for quick collection of leaves, grass clippings, and debris, while its lightweight design facilitates easy maneuverability. The CR450S also features a 5-bushel capacity collection bag, which is designed to optimize airflow and reduce clogging, ensuring uninterrupted operation.

Moving to the CR550 series, users will find enhanced power and efficiency. The CR550 utilizes a commercial-grade engine that delivers 5.5 horsepower, making it capable of handling larger debris and more demanding cleanup tasks. The 27-inch nozzle still provides excellent coverage, but the increased power allows for improved suction performance even in challenging conditions. The CR550 is equipped with a 7-bushel collection bag as standard, allowing for extended operation before needing to empty.

Two variants of this model, the CR550HC and CR550H, bring additional features for specialized tasks. The CR550HC (High Capacity) is designed for heavy-duty applications, featuring a high-capacity collection bag that holds an impressive 10-bushel volume. This makes it ideal for professional landscapers and contractors who require prolonged usage without frequent stops. The CR550H offers enhanced filtration and a more robust design, ensuring dust control and improving air quality during operation.

All models in the Billy Goat range integrate user-friendly features such as adjustable height settings and ergonomic controls, making them easy to operate for users of all skill levels. The durable construction of these vacuums, including heavy-duty wheels and sturdy frames, ensures they can withstand the rigors of regular use.

In summary, the Billy Goat CR450S, CR550, CR550HC, and CR550H models represent the pinnacle of vacuum technology for lawn care and debris management. Their combination of powerful engines, high-capacity bags, and user-friendly features make them essential tools for anyone looking to maintain a clean and tidy outdoor space. Whether for residential or commercial use, these machines deliver the performance and reliability that users can trust.