Part No 840186 14 Form No F012507A
MV650H PUSH Vacuum Owner’s Manual
3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine.
PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid
kickback.
4. Move throttle control back to RUN position and allow engine to reach correct operating speed.
VACUUM NOZZLE HEIGHT ADJUSTMENT
FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into
the nozzle. NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank
handle clockwise and counter-clockwise.
SECURE UNIT AT
THE HANDLE
WITH LEFT HAND
DURING START
PULL ROPE
STARTER WITH
RIGHT HAND