QL2300 Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every use

Every 5 hours (daily)

Every 10 Hours

Every 25 Hours

 

 

 

 

 

Inspect for loose, worn or damaged parts.

 

z

 

 

 

 

 

 

 

Check engine oil and air filter

z

 

 

 

 

 

 

 

 

Clean hose

z

 

 

 

 

 

 

 

 

Engine (See Engine Manual)

 

 

 

 

 

 

 

 

 

Inspect battery for damage or leak

 

 

z

 

 

 

 

 

 

Keep engine free of debris

z

 

 

 

 

 

 

 

 

Check battery terminal for corrosion

 

 

 

z

 

 

 

 

 

Check for excessive vibration

 

z

 

 

 

 

 

 

 

IMPELLER REMOVAL

1.Wait for engine to cool and disconnect spark plugs from the both sides of the engine.

2.Disconnect the negative battery cable (black) (item 12) from the battery.

3.Remove the hose coupler assy from the unit (item 36).

4.Remove the hose boom assembly.

5.Remove the intake housing assembly (item 33) using 1/2" socket and socket wrench to remove (12) locknuts and washers (item 60 & 63). Be careful to place intake assembly to the side without putting excess strain on safety switch wire harness

6.Remove impeller bolt and lock washer using 5/8" socket and impact wrench (see fig. 6).

7.Once bolt is removed impeller should slide out freely. If impeller will not slide free on crankshaft, obtain a 3/4"-10 x 3" bolt and thread it into the nut that is welded onto the center of the impeller and tighten slowly to push the impeller off the crankshaft.

Note: 3/4"-10 x 3" bolt is included in each impeller replacement kit or the bolt can be ordered from your local Billy Goat Dealer (part no. 790214).

8.When impeller is free of the engine shaft, align impeller with the opening and pull it straight out of the housing.

9.Using a new impeller bolt, washer, and lockwasher, reinstall new or repaired impeller in reverse order. Note: Be sure spacer is in place behind impeller before tightening.

10.Tighten impeller bolt. Torque impeller bolt to [60 Ft. Lbs. (81.4 N.m)].

11.Repeat steps 2 through 5 in reverse order.

12.Reinstall spark plug wires.

Fig. 6

INTERLOCK SYSTEM

With hose coupler installed (as shown in Fig. 8) the switch is open & engine is not grounded out, allowing engine to run.

IGNITION

UNITThrottle stop

Spark plug

INTERLOCK

SWITCH

Hose must be installed and switch lever must engage switch for engine to start.

Fig. 8

Part No 790294

12

Form No F061907B

Page 12
Image 12
Billy Goat QL2300 owner manual Periodic Maintenance

QL2300 specifications

The Billy Goat QL2300 is a powerful and versatile lawn care equipment designed to provide efficient turf management for both commercial and residential applications. This high-performance walk-behind aerator is notable for its robust construction, innovative technologies, and user-friendly features, making it a must-have for landscaping professionals and avid gardeners alike.

One of the standout features of the QL2300 is its 23-horsepower engine. This powerful engine delivers ample torque and speed, enabling the aerator to perforate the soil effectively, promoting better air, water, and nutrient penetration for healthier grass. The engine is also designed for optimal fuel efficiency, allowing users to cover larger areas without frequent refueling.

Equipped with a patented hydrostatic drive system, the QL2300 offers seamless speed control, allowing operators to adjust the walking speed to match the task at hand. This technology not only enhances maneuverability but also ensures a consistent aeration depth, which is crucial for producing uniform results. The ease of operation makes it an ideal choice for those who may not be familiar with heavy-duty lawn care equipment.

The aerator features a unique steel frame construction that provides durability and stability, even on challenging terrains. Additionally, its heavy-duty, 18-inch wide aeration tines are specifically designed to penetrate tough soil, ensuring effective aeration with optimal hole spacing. The QL2300’s tine engagement system can be easily controlled, allowing operators to quickly engage or disengage the tines based on the needs of the lawn.

Another impressive characteristic of the Billy Goat QL2300 is its compact design and foldable handles, which facilitate easy storage and transport. This feature is particularly beneficial for landscape contractors who need to move their equipment between job sites.

Furthermore, the QL2300 comes with user-friendly control panels that provide easy access to engine controls, enhancing the overall operational experience. The machine’s large rear wheels offer excellent traction and stability, making it easier to navigate uneven surfaces while ensuring proper aeration.

In summary, the Billy Goat QL2300 stands out in the market for its powerful 23-horsepower engine, hydrostatic drive system, and durable construction. Its ease of use, innovative features, and exceptional performance make it a top choice for professional landscapers and homeowners aiming to achieve a lush, healthy lawn. Whether tackling large commercial properties or smaller residential yards, the QL2300 delivers reliable results that contribute to effective turf management.