Manuals / Billy Goat / Household Appliance / Vacuum Cleaner

Billy Goat VQ902SPH owner manual Periodic Maintenance

Models: VQ902SPH

1 20
Download 20 pages 17.74 Kb
Page 12
Image 12

VQ Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every Use (daily)

Every 5 hrs (daily)

Every 10 Hrs

Every 25 Hrs

Every 50 Hrs

 

 

 

 

 

 

Inspect for loose, worn or damaged parts.

 

z

 

 

 

 

 

 

 

 

 

Clean Debris bag and check strap tightness

z

 

 

 

 

 

 

 

 

 

 

Check Tire pressure

z

 

 

z

 

 

 

 

 

 

 

Engine (See Engine Manual)

 

 

 

 

 

 

 

 

 

 

 

Check for excessive vibration

 

z

 

 

 

 

 

 

 

 

 

Check belt adjustment (pg. 15)

 

 

 

 

z

 

 

 

 

 

 

Grease wheel zerks

 

 

 

 

z

 

 

 

 

 

 

Lubricate Drive chain and oil control pivot

 

 

z

 

 

points

 

 

 

 

 

 

 

 

 

 

 

IMPELLER REMOVAL

1. Disconnect spark plug wire.

2. Disconnect remote control rod from nozzle gobbler door.

3. Elevate front of machine using stable support blocks between housing and ground so that front caster wheels are not touching ground.

4. Remove nozzle and caster wheel brackets from the housing.

5. Remove both the top and side belt guards between housing and transmission.

6. Loosen wire belt guide located on front face of engine on left side of unit between housing and engine.

7. Slide belt toward engine, out of belt groove in impeller hub drive pulley.

8. Remove impeller bolt and lock washer.

9. If impeller slides off freely, proceed to (step 12). (Do not drop impeller).

10.If impeller does not slide off crankshaft, place two crowbars between impeller and housing on opposite sides. Pry impelleraway from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller.

11.If the impeller cannot be loosened, obtain a 1” (25.4mm) longer bolt of the same diameter and thread type as the impeller bolt. Invert engine and impeller and support engine above ground to prevent recoil damage. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft.

12.Slide impeller off of crank shaft and remove impeller from housing.

13.Reinstall new impeller and all applicable spacers, new impeller bolt and lockwasher in reverse order of removal. (See the parts drawing on pages 16 and 17 for parts break-down and parts list on page 18 for proper impeller bolt torque specifications and proper spacer for Honda engine only.)

14.When impeller is installed, slide belt into drive pulley and adjust wire belt guide as shown on page 13 (see fig. 10 & 11).

15.Reattach nozzle and both caster brackets in reverse order of removal.

16.Check operator's bail to ensure that it operates properly. (If not, see drive adjustments on page 13). Note: Drive must completely disengage with bail released and must engage when bail is depressed within 1.0" (25.4mm) of the operator's handle.

17.Reinstall all belt guards.

18.Reconnect spark plug wire.

Chain Lubrication: Using S.A.E. 30 weight oil or equivalent. See maintenance schedule.

Grease: Wheels, Casters, and Rear Axle Bearings.

Tire air pressure: Check at regular intervals & maintain: Rear SP 13" tires at 14 psi. (9.8 kPa).

Part No 830542

12

Form No F0713007A

Page 11 Page 13
Page 12
Image 12
Billy Goat VQ902SPH owner manual Periodic Maintenance
Page 11 Page 13

VQ902SPH specifications

The Billy Goat VQ902SPH is a robust and versatile vacuum system designed to tackle the toughest outdoor cleanup tasks. This powerful machine is a favorite among landscape professionals and homeowners alike, thanks to its high-performance capabilities and user-friendly features.

One of the standout features of the VQ902SPH is its powerful 10.0 HP Honda engine. Known for its reliability and efficiency, this engine provides the suction strength needed to collect debris, leaves, and even small branches with ease. The vacuum boasts an impressive airflow capacity of up to 2000 CFM (cubic feet per minute), making it one of the most effective yard vacuums on the market.

The vacuum is designed with a high-dump feature that allows for easy disposal of collected debris. With a simple pull of a lever, users can dump the contents of the hopper up to 34 inches high, enabling them to empty the vacuum into trash bins or dump trucks without straining their backs. The large 37-gallon collection bag minimizes downtime by allowing for extended use between emptying.

Another notable characteristic of the Billy Goat VQ902SPH is its self-propelled system, which enhances maneuverability. Users can adjust the speed of the machine according to the terrain and their walking pace. This feature is particularly beneficial in larger yards or commercial properties where speed and efficiency are vital.

In terms of technology, the VQ902SPH incorporates a patented design that includes a unique fan system which reduces noise while maximizing suction power. This design minimizes disruption in residential areas while effectively collecting yard debris. The vacuum also features a user-friendly control panel that is easy to operate, even for those who may not be tech-savvy.

Durability is a key aspect of the VQ902SPH’s design. Constructed with heavy-duty materials, it is built to withstand the rigors of frequent use in various weather and soil conditions. The vacuum is equipped with large, pneumatic wheels that provide excellent traction and stability, allowing it to traverse different terrains without difficulty.

Overall, the Billy Goat VQ902SPH is a top-tier choice for anyone in need of a reliable yard vacuum. With its powerful engine, high-dump capability, self-propelled features, and durable construction, it is designed to make outdoor cleanup easier, faster, and more efficient. Whether you are maintaining a residential lawn or managing large commercial properties, the VQ902SPH delivers exceptional performance and convenience.