Binatone 950 manual Guarantee

10. Guarantee

The Binatone Action 950 is fully guaranteed for 12 months from the date of purchase shown on your sales receipt. The guarantee does not cover damage by misuse or negligence, or by excessive voltage.

Please keep your sales (till) receipt - this is your guarantee. You should also keep the original packaging materials.

When unpacking your Binatone Action 950, check for visible damage. If you see any damage, do not use the PMR - return the whole unit to where you bought it.

If your Binatone Action 950 develops a fault, refer to the “Troubleshooting Guide.” section of this manual. If you can’t solve the problem, return the whole unit as follows;

While the unit is under guarantee

1.Pack up all the parts of your Action 950,using the original packaging.Remember to include the mains adaptor.

2.Return the unit to the store where you bought it, and make sure you take your sales receipt as your proof of purchase.

3.In the unlikely event that you need to return your Action 950 to our Repair Centre while it is under Guarantee,please include the sales receipt. There may be a 5 handling charge for repair of unit und Guarantee.

Repair after the Guarantee has expired

1.If the unit is no longer covered by Guarantee, first follow step 1 as for repair under Guarantee, Then...

2.Call our service Department on 0845 345 9677 and ask for a quotation of the repair charge, and details of where to send your Action 950 for repair.

3.Return your Action 950 to the address given by the Service Department, making sure to include your name and address, and a cheque or postal order for the value of the repair charge.

This does not affect your statutory rights.

Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.

Effective Range

The Transmission range of the product is dependent on the environment terrain where it is being used, the following diagram attempts to guide the user on the sort of performance to expect for everyday use.

Signal Strength
0	Range(Km)	10

Optimum (open area) (1)

Medium ground based obstruction (2)

Heavily built up area (3)

Range Slope

Range Check

The Transmission range will be affected as shown in the above diagram. The transmitting range typical values for different environment conditions will be (1) 10 km (2) 4 km (3) 2 km. It should be remembered that these are only guide values as actual achieved distances will be dependent on the environment and terrain.

Binatone Help Line - 0845 345 9677