desired number of hours you want the unit to operate (2, 4, 6 or 8).
• | The number of hours selected will light up and |
Figure 1
E
F
G
H
| remain illuminated on the control panel. |
• | When time is up, the air cleaner will beep 3 |
| times and turn off. |
2. To CANCEL the timer, press the TIMER button until | |
TIMER indicator lights are off. You may also cancel | |
the timer operation by turning the power button off. | |
CLEANING AND
MAINTENANCE
CLEANING THE PERMAtechTM FILTER
The PERMAtechTM filter is designed to never need replacement. However, we recommend regular cleaning for optimal performance.
•Every few weeks, check the condition of the filter.
•After approximately 3 months of operation, a Filter Clean Indicator will alert you to clean the filter before further use.
To clean the filter:
1.Turn off and unplug the air cleaner.
2.Remove the air inlet grill by pulling on the tab.
3.Remove and examine the foam
•If it has collected dust or lint, remove and wash it in warm soapy water. Rinse and drip dry thoroughly before placing it back into the grill inlet.
4.Check the condition of the PERMAtechTM filters and remove if dirty.
5. Clean the PERMAtechTM filter.
•Using your vacuum cleaner,
run the brush attachment |
| |
along both sides of the filter |
| |
and clean between the | Figure 2 | |
pleated layers (Figure 2). | ||
|
IMPORTANT: Do not use water, household cleaners or detergents to clean the PERMAtechTM filter.
A.Inlet Grill
B.Washable Foam
C.PERMAtechTM Filter (2)
D.Filtered Air Outlet
E.Control Panel
F.Filter Check LED
G.Filter Reset Button
H.Timer Button
I.Timer Leds (4)
J.Ionizer Button
K.Power Button
L.Power/Mode LED’s (3)
M.Auto Button
D 
I
J
K 
L
M
A
C B
E8 | E9 |
