C L E A N I N G / M A I N T E N A N C E
T R O U B L E S H O O T I N G
WA R R A N T Y I N F O R M AT I O N
Figure 2 | J | |
| ||
| E | |
C | D | |
B |
| |
A |
| |
F | E | |
G | ||
|
H 
I
A. Power Button (
)
B. Speed Controls
( / )
C.Timer Button ( 
)
D.Ionizer Button (
)
E.LCD Display
F.Timer Icon/ Indicator ( 
)
G.Ionizer Icon/ Indicator (
)
H.Filter Service Indicator ( 
)
K L
M
I.Speed Setting Indicator ( 
)
J.Filtered Air Outlet (not shown)
K.Permanent HEPA- type filter
L.Washable Foam
M.Air Inlet Grill
2.Remove the air inlet grill.
3.Remove and examine the foam
4.Check the condition of the PERMAtech® filters and remove if dirty.
5.Clean the PERMAtech® filter.
• Using your vacuum cleaner, run the brush attachment along both sides of the filter and clean between the pleated layers (Figure 3).
IMPORTANT: Do not use water, household cleaners or detergents to clean the PERMAtech® filter.
Reinstalling The PERMAtech®
NOTE: A hang tab and filter clips ensure the filter attaches properly.
1. Make sure the hang tab is securely in place. Align the clip on the top of the PERMAtech® filter with the rails on the inside of the unit. Gently slide the filter onto the rail (see
TIPS AND TROUBLESHOOTING
Problem | Solution |
•Unit will not operate ✔ Make sure the unit is plugged in and outlet is energized.
✔Make sure unit turned ON.
• Decreased air flow | ✔ Make sure nothing is blocking air inlet and filtered air outlets. |
✔Remove all plastic bags from filters.
✔Check condition of filters and clean if necessary.
•PERMAtech® filter appears ✔ This is normal and does not affect performance in any way. A new filter is not
dirty, even after | necessary. |
vacuuming clean |
|
• Excessive noise | ✔ Remove plastic bags from filters. |
✔Make sure parts are firmly positioned in place.
•The filter service indicator ✔ Check condition of the filters and clean if necessary.
will not reset | ✔ Press and hold down the Power button ( |
| ) for 3 seconds. The Filter Service |
| |||
| Indicator icon on the display screen should disappear. | ||
Filters can be purchased online at www.bionaire.com, or by calling
Air Cleaner Model # | Filter Quantity Needed | Filter # | Filter Description |
BAP9700 | 2 | PERMAtech® Filter | |
|
|
|
|
LEARNING MORE
3 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of three years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province,
AIR CLEANER
WITH REMOTE CONTROL5.If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down. DO NOT WASH FILTERS.
WARNING: Do not allow moisture to come in contact with the main housing of the air purifier.
Cleaning The PERMAtech® Filter
The PERMAtech® filter is designed to never need replacement. However, we recommend regular cleaning for optimal performance.
•Every few weeks, check the condition of the filter.
•After approximately 4 months of operation, a Filter Service Indicator ( 
) will appear on the LCD Display to alert you to clean the filter before further use.
To clean the filter:
1. Turn off and unplug the air cleaner.
Figures 4 and 5). 2. Place air inlet grill back
onto unit securely.
3. Reset the Filter Service Indicator by pressing the Power button
(
) for 3 seconds.
NOTE: Every time you power on the air cleaner, the Filter Service Indicator icon ( 
) will blink 3 times on the LCD display. This routine test checks the current condition of the filters. If filters are in good condition, the icon will disappear. If not, the icon will remain lit until filters have been cleaned and Filter Service Indicator
( 
) has been reset (see instructions above).
Should the filter become damaged during cleaning, replacements are available by calling
For a wealth of information about your air cleaner and other Bionaire® products, visit our web site at www.bionaire.com or call
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
139782/9100040004481 | BAP970010EM3 | Printed In China |
|
|
state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call
In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y OM1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO
NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
Instruction Leaflet
Read instructions before operating. Retain for future reference.
Questions? Comments? Call
6/24/10 10:15 AM 
