Assembly
Charging the battery
1.When completely charged, the EasySweep provides up to 45 minutes of cleaning time.
2.When charging for the first time, allow to charge uninterrupted for at least 16 hours. Thereafter, charge at least 16 hours to fully renew the EasySweep bat- tery. The charging indicator light will illuminate when properly connected and will not turn off when fully charged.
Note: The Power Switch must be in the OFF position when charging.
3.Decreased operating time may indicate the battery has built up a resistance. To recharge, first completely exhaust the battery, recharge it, and then exhaust it again before recharging a second time. This procedure may be required more than once.
4.When charging is complete, be sure to unplug the EasySweep from the charger.
Attention:
If your battery still fails to recharge or does not hold a charge of normal duration, call:
BISSELL Consumer Services
Monday – Friday 8 a.m. – 10 p.m. ET
Saturday 9 a.m. – 8 p.m. ET
Or visit our website at:
www.bissell.com
Operations
Using your EasySweep
The EasySweep is a quick and easy way to clean your bare floors, low pile rugs and carpet.
1.Tip back the handle into typical use posi- tion and gently tap the power switch on the sweeper with your foot.
Note: The unit will continue to run even if the dirt container door is not closed.
2.The handle swivels for easy maneuvering to clean your bare floors, low pile rugs and carpet.
3.When done, turn off the unit by gently tapping the power switch with your foot and store for the next use.
WARNING:
EasySweep will not pick up cray- ons, marbles, and other large or hard objects.
5
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
