Special Features of your BISSELL PowerWash ProHeat™
The BISSELL SmartClean™ System
The PowerWash ProHeat is a home cleaning system that automatically mixes hand hot tap water with BISSELL Advanced Deep Cleaning Formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered brush and suction provide a safe and effective method of cleaning.
SmartTemp™
Temperature control automatically heats the cleaning solution as it is being applied to the carpet (*) to safely optimize cleaning effectiveness.
The Power Switch controls the power to the machine and
1. the SmartTemp feature.
*SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools.
The SmartTemp Ready Light indicates the heater is ON. It
2. is found on the front of the handle where it is easy to see while you clean. Wait two minutes for the heater to warm up before beginning to clean.
SmartTemp increases the water temperature approximately
3. 25° and will not allow it to exceed 180°.
SmartMix™
Provides custom control for each cleaning job.
Lift the SmartMix Bottle up and out of the
1. machine base.
Turn the SmartMix Bottle over so that the Valve Cap is in
2. an upward position. Unscrew the Valve Cap and fill the SmartMix Bottle to the mark with BISSELL Advanced Deep Cleaning Formula.
Power Switch
ON
SmartTemp Ready Light
SmartMix
Bottle
3.
Replace the Valve Cap, turning until snug.
Valve Cap 
6
