How to use this guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL Little Green Portable Deep Cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your cleaner.
Pay particular attention to the product
diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL Little Green for many years.
Product Features
Refer to Assembly Diagram on page 4
Solution Tank
The Solution Tank is the translucent tank at your right as you face the Little Green. Remove the Tank by grasping the indented handle and pulling it toward you, then tilting out.
To Fill the Solution Tank
Open the Solution Tank by pulling up on the round cap. Add BISSELL Little Green Formula to the FORMULA fill line
NOTE: Your Little Green is shipped with an 8 oz. starter bottle of formula.
Fill the Solution Tank with hot (NOT boiling) tap water to the WATER fill line.
Replace the cap before placing the Solution Tank back into the unit.
Replace the Solution Tank by pacing it bottom first into the cavity, then tilting it, pressing gently at top until it snaps closed.
Collection Tank
The Collection Tank is the translucent tank at your left as you face the Little Green. It is removed and replaced on the unit just like the Solution Tank. Empty the Collection Tank after each use, when dirty water reaches the indicated maximum fill line, or as instructed in this User’s Guide.
WARNING:
Do Not plug in your deep cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Water
Fill
Line
Formula Fill Line
5
