Slowly move QuickSteamer back and forth over soiled surface one time while depressing Trigger. Do not overwet.
Repeat motion over same area without depressing Trigger.
Repeat Steps 1 and 2 until no more dirt can be removed.
Rotate Quick Release Cord Wrap and plug in.
Turn Power Switch located on the back of Lower Body to ( ) ON.
Attaching the Bare Floor Tool Continued
Empty and rinse Clean Water Tank.
5.
Using the Formula Measuring Cap, add two (2) capfuls of
6. BISSELL® Floor Cleansing Formula™ to the Clean Water Tank. Add 1/2-gallon of hot (NOT boiling) tap water. Fill only to fill line – do not overfill.
Replace and turn the Formula Measuring Cap clockwise
7. until secure.
8.
9.
Cleaning Bare Floors
1.
2.
3.
If Floor Nozzle stops spraying, turn Power Switch to
4. OFF ( 
) and check water and cleaning solution levels. Refill if needed.
8
Bare Floor Tool
CAUTION:
Do not lay QuickSteame on its back with Clean Water Tank in place. Do not tip up foot with Dirt Water Tank in place.
