Operations
Using your cleaner
1.Remove the plastic plug guard and dispose.
2.Unclip polarized plug from power cord.
3.Rotate the Quick Release cord wrap towards floor and slip power cord from upper and lower cord wraps.
4.Connect power cord plug to a polarized outlet.
5.To keep the power cord out of your way while cleaning, place it in the cord hook by the top of the vacuum.
Power Switch pedal
Cord Hook
The red power switch pedal is located on the back of the cleaner, under the cord wraps.
1.Step on the power switch to turn the unit “On”. The rotating floor brush and suc- tion will start.
2.Step on the pedal again to turn the vacuum “Off”.
Power
Switch
Pedal
Quick
Release
Cord
Wrap
Tip:
Before cleaning under low furniture, check for objects that might block the vacuum hose. Do not pick up hard or sharp objects such as glass, nails, screws, coins, paper clips, etc. with vacuum.
caution:
Before using your vacuum, make sure that all filters
operate your vacuum without the filters.
7
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
